Subscribe by Email

Your email:

Follow Me

All Things Sensors, Signal Conditioning, Power Management IC's and Micropumps

Current Articles | RSS Feed RSS Feed

Choosing the Right Sensor Signal Conditioning IC

 

This blog post was submitted by David Grice a systems architect at ZMD America.

Designing and implementing sensor interface designs for nonlinear, temperature-dependent transducers presents some difficult challenges.  The advent of dedicated and powerful Sensor Signal Conditioning (SSC) ICs has made the job easier, but choosing the right IC for a particular sensor and application is critical for making optimal performance and cost tradeoffs.  In this article we will examine some of the most important features and functions to consider when choosing the best SSC for your application.

Knowing your Sensor
The first step in choosing an SSC is to understand the characteristics of the sensor that it interfaces.  Sometimes a designer is tempted to skip this step and pick an SSC with the most powerful and complex correction techniques that are available or affordable.  This is not only wasteful in terms of cost and loading on expensive production testing resources, but often detrimental.  Depending on the intelligence designed into the correction algorithms, sometimes a higher-order equation fit will create more error than a simpler equation that more closely matches the inherent response of the sensor.  Characterizing and analyzing sensor behavior over all environments is time well spent.

The Right Partner
Before plodding through pages and pages of datasheets to understand every tedious detail of dozens of potential SSC candidates, take a step back and evaluate what level of support and overall experience the manufacturer provides with their products.  This is especially important for a product like an SSC where complex equations are used to calculate the correction coefficients.  If the manufacturer does not provide development hardware and software to automate and evaluate the calibration routines, you will be left to develop those resources on your own.   Even more important is the ability and willingness of the manufacturer to answer questions  about their product and support materials that routinely arise during the development phase.

Total System Cost
Another commonly overlooked factor in SSC selection is the production cost of calibration, especially for high-volume applications.   Sometimes a cheaper part will actually end up costing more overall because it uses an unsophisticated calibration routine that requires more time on costly testers and environmental chambers.  The ZMDI family of SSC products is designed with this in mind.  Their intelligent correction algorithms allow for “single pass” calibration that minimizes the time required for data collection and for coefficient calculation and programming.  This is a tremendous benefit and should be given serious consideration in the selection process.

Narrowing the Field
After selecting the right partner and family of products, the choice must be narrowed to an individual part.  Typically, the process of elimination is the easiest and fastest way to accomplish this.  For example, the ZMDI SSC product family is broadly divided into resistive and capacitive bridge sensor types.  If your sensor is capacitive, the candidates will be limited to the ZSC312X series.

After sensor type, the next criteria that narrow the range of products most quickly are the qualification level and environmental requirements.  For automotive level quality (AEC-Q100), the available choices  are the ZSC31150, ZSSC3170, or one of the ZSSC31xx products.  Applications that do not require automotive qualification can use any of the ZSC310xx or ZSSC30xx parts.

Once the field has been narrowed to this point, the remaining criteria for completing the selection process are operational constraints such as gain and resolution, response time, supply voltage and current, and output interface type (analog, I2C, SPI, etc.).  If multiple parts meet all these requirements, the final selection can be made based on price or special features like alarm outputs or sensor diagnostics.
Signal Conditioning Guide Product Chart
Options + Process + Experience = Success!
Abundance of choice can be a double-edged sword, but a methodical approach combined with an experienced partner will make the selection process  smooth, efficient, and successful.  

Learn more about sensor signal conditioning

Comments

I need to interface to a Pressure transducer. It has a 1K bridge, requires 10V excitation, with a 0 to 100mV output. Being ratiometric is very good but not necessary. It has to operate from -40C to +100C (125C is better). Do you have a solution?
Posted @ Tuesday, September 17, 2013 9:00 AM by David Anoushirvany
Post Comment
Name
 *
Email
 *
Website (optional)
Comment
 *

Allowed tags: <a> link, <b> bold, <i> italics